Because this Blog is updated regularly it is a good idea to visit at least once a week so as not to miss anything. If however you are not a regular visitor, please use the archive links, at the bottom of the side bar on the right, to view postings that have moved off the main page. Or type a key word in the search block in the black bar at the top left and click on "SEARCH BLOG" and it will take you to the posting within our Blog. (For instance, type "Jart" and all the post that mention Jart will open) The Label at the bottom of a post can also be used. Click to get all posts with the same label together!
This BLOG is best viewed at a screen resolution of 1024x768. Click here to get instructions on how to adjust your monitor to these settings.



Showing posts with label hectic electric. Show all posts
Showing posts with label hectic electric. Show all posts

Tuesday, November 18, 2008

The “Spark side of Life”

I guess you can call me “Spark Piet” now as well because sooner or later the jump was going to happen. After flying Tony's E-Tsotsi in the Nats this year and the seeing Mike and Gordon’s efforts, it was enough to push me over the hill to the “Spark side of Life”.

But the Electric aircraft that impressed me the most was E-flight’s “ Mini Pulse” by Horizon Hobby’s and that Paul Carnal few regularly before and after intervals at thermal completion’s and also at the slope when the wind did not blow.

After phoning around to most hobby shops and to my disappoint found that this AFR model was not freely available. So the itch to buy subsided a bit until 2 weeks ago when I walk in to Ariel
Concepts Shop. I did no need anything in particular (had a hour spare before a appointment with a client) and was just browsing around. Then suddenly in front of me there it was the E-flight Mini Pulse and before you could say “Bob’s your uncle” the Box was under my arm, the last 2 zeros of the prize tag ignored, and on my way to the till.


The box that start it all.

You can assemble the Mini Pulse in 3 hours and it is really a good quality kit.
However no sooner you have finished putting it all together, you realize that it is not going to fly until you buy all the electrics to get it air born.

At this stage you start asking questions about electric motors, props ,lipo batteries,
Electronic speed controllers and so more. The Pulse kit do not in clued the electric motor but they recommend a e-flight 450, but after talking to Paul found out that he use a e-flight 480 mainly because of the high felt height above see level.

I then phone MAD models and they recommended that I had a look at the scorpion range of brush less motors. So now I landed myself in the deep end of “Spark” side.

Fortunately I found a very good software application (Motocalc 8) on the web and this help me with the selection of the motor, speed control and batteries. If you are interested you can go to this link. http://www.motocalc.com/motodown.htm.



The end result of all this was that on Sunday the Mini Pulse took to the air and to say the least it did just what I expected. I got in 5 Flights and the vertical performance of this model was just phenomenal. I still have a lot to learn but don’t mind if when you see me again call me “Spark Piet”









New Members Johan and Loraine maiden their gliders on Sunday. That’s the way, well done.



Monday, June 09, 2008

Big Electric Glider Assist

Well the weather this last weekend was excellent and altough I had not planned to fly, I decided to test the 2mtr red and yellow electric on sunday as the day dawned calm and clear.
It flies nicely the first flight lasting 20 minutes with about 4 minutes of motor run.
The power is somewhat dissapointing , largely due to the motor still only running at about 70 percent throttle , the reason being that on my radio A Futaba 9 zap, this stick in Gliding mode is for airbrakes/flaps and I have various cross mixes such as flight modes, trailing edge camber with delay on closing and flaperon mixing, deleting all these and the motor just would not run.


Funny thing though when its at full throttle and battling to climb I add trailing edge camber and it revs up some extra , when time allows I will set it up in airplane mode , but for our upcomming slope trip , I will battle on with carefull energy management.






So after these maiden flights I spent the afternoon setting up the Electric on the Ventus, now this is a whole new ball game, the power pod attached and some safety precautions taken(check the anchor).


Common sense with big propellors... give them plenty of respect, a good fishing friend of mine Jakes, while running a large power plane on his work bench ,swinging a big prop the aircraft lurched forward and he put out his hand instinctively to protect himself , net result the prop removed two of his fingers , on his left hand. I have no doubt this big electric could do some damage. Always take care, safety first.
The two packs of Nicads giving about 12 volts just did not cut it, so I hooked up two Li-po packs in series giving about 22 volts this seems to do the trick with plenty of power, at half the weight.


The Ventus is fitted with a 9 ch receiver and the programming was no problem as channel 8 is operated on a slider switch and this will operate the motor ,all other setups are normal for this glider. Nice thing about the Jeti Opto speed controller is that the receiver/servo's and motor operate on their own battery packs .Testing will take place soon on the slope to check climb rates and also that the thrust line of the power pod is ok , last time I flew a power pod on a glider was 1977 with a babybee on a two mtr Drifter glider ...my first rc plane, they say history repeats itself.


Regards Mike




Wednesday, June 04, 2008

Electric glider



The 2mtr electric assisted glider is almost complete, home built .. no ARF for me and it looks like a promising flyer,

the plane has been built of balsa and using conventional construction, a small amount of glass and epoxy resin was used around the nose to beef up the engine (sorry motor) bulkhead . The glider weighs 840 grams all up including the electric setup, radio and controls .




Next comes the part were the motor is run (I am no electric Guru) so approached this with a cautious logical test.

The motor ,gear box and prop were all tightened in place , the radio receiver, two servo's and speed controller, connected into the throttle port on the receiver and checked first that it was in the off /idle possition.

I switched the radio tx on and then connected up the Li-Po battery, which was fully charged.

Openning the throttle the motor sprang into life.... I ran it at full throttle for 1 minute and then shut it down, a quick feel of the motor and components indicated everything was still ice-cold a good sign.

Although the motor had a fair amount of thrust , I dont expect verticle performance but certainly enough to give a steady climb. The reason for this is probably the following, the radio program /model I selected was using this port for flaps and the full deflection was only 75 % , so the motor could rev 25 % more ,the gearbox ratio is also slowwing down the rpm. but Ill play it safe for now, and only try a bigger prop later.


Next test was more sustained running I ran the motor at full(75%) throttle for 6minutes and tested for heat , the motor got warm , now I ran for a futher 12minutes trying to flatten the battery . The motor only gets warm and was still running fine , no rev drop that I could hear.

The voltage feeding the receiver was checked with a multimeter at 5.06 volts.

So at this stage it looks ok for a test flight. What a relief ...NO MAGIC BLUE SMOKE..


For those experts out there who understand the (dark side) wonderfull electric scene this may seem a little basic , but its a beginners (me , myself , and I )guide to understanding electrics.

For the record the Li-po is a 3cell 1000mah 15c , the motor a Waikera inrunner 3250kv (I understand actually for a helicopter) the speed controller Bec 30amp Waikera, the prop a 9x5

folding. It all seems to work together ok, lovely for those early calm mornings on the slope or late afternoons, when the winch is already packed away.


I think it will become a favourite.



Tuesday, May 27, 2008

Dare to enter "The Dark Side"

The refinement of batteries and brushless motors in recent years makes this element of our hobby , very attractive to RC flyers.
The electric revolution is here to stay, so at some stage we all have to embrace it..serious.
This clean(no oil) eco friendly form of power flying with its low noise really sits sandwiched between the power flyer(IC internal combustion)as it is now known and pure gliding .It is one of the fastest growing aspects of the RC flying hobby.
The repeated comments received about the "dark side" really stem from a lack of knowledge of this whole new world of propulsion ,which can have synergy with our form of silent flying.
I for one have very little knowledge of this (dark art) and listen to the guru's in awe and amazement.
They speak a wierd langauge of er ..cell balancers, watts, kv rating, C rating, li-poly , A123, nimh and watts per dmsq . Makes no sense, at all ,rather mysterious.
The local hobby shops are full of ready to go off the shelf electric powered gliders, and at BERG we see many new pilots comming out to the field with this type of aircraft, these are our future pure glider pilots . We welcome the people who start out flying this way.
They buy the box of tricks but know not what makes it tick. (fly)


So getting my feet wet ,but not actually jumping in I bought a cheap electric setup, the first motor emitted , the "deadly blue smoke" but this after a few very promising flights.
I accept I am an old dog and this is a new trick. Who said ........





I replaced the motor with a small AXI outrunner and have had several more flights with no smoke.

























Recent trips to the slope (Sungazer) really convinced me , on the friday before the event Ken Kearns with his electric "assisted" glider made a one hour flight with several small motor runs of 60 seconds in total , usually in patches when the lift just died. You can see the folding prop of the motor on Kens Skylark(electric).



So project electric no 2 is on the building board,
a 2 mtr rudder elevator sailplane with a fairly hot in-runner motor / folding prop and gearbox

In this photo I have started the fuselage construction and want to make sure the gearbox/motor is going to all fit.






Traditional wing constuction with balsa ribs and cap strips, centre panel complete , tips built together and cut in half later.



In this photo the 2mtr wing is complete and covered with monokote it weighs in at 264grams
If I can keep the fuselage light it should climb well.
Piet I have a strong feeling will also go this route , after borrowing an electric and almost winning the f5j event at the recent SA nationals .He flew Tonies 2mtr Tsotsi , with and E-FLITE 10 brushless motor to good effect



So the dark side will be exposed in a series of steps first the the small electric fun fly, then the electric 2 mtr with a hot in-runner/ gearbox and folding prop combination and finally the big 8kg Ventus with the AXI 4130 pushing the CAM 16x10 prop which will be used initially on the slope to sustain flight when the lift stops.
Really quite simple ..unless we have that dreaded blue smoke again, I now also tend to read the instruction booklets BEFORE I actually connect up anything and read up as much as possible on
mighty internet (which was also a tool of the dark side , American military actually).
On the previous power pod post(dig the P's) Bruce asked about the ESC electronic speed controller , he had one that did not cut off the motor at a predetermined voltage and lost his plane due to radio failure/loss of voltage. This was a problem on the older units , on the Ventus/ Axi I have used the recommended JETI 70 amp opto esc but will power the receiver and servos with their own battery pack.















Dabbling in the dark side????? no not really rather exploring into the leading edge light.
Try learn something new everyday it keeps your brain healthy and exercised.
I will post some pictures if these things actually get of the ground
Cheers for now,
Mike