Because this Blog is updated regularly it is a good idea to visit at least once a week so as not to miss anything. If however you are not a regular visitor, please use the archive links, at the bottom of the side bar on the right, to view postings that have moved off the main page. Or type a key word in the search block in the black bar at the top left and click on "SEARCH BLOG" and it will take you to the posting within our Blog. (For instance, type "Jart" and all the post that mention Jart will open) The Label at the bottom of a post can also be used. Click to get all posts with the same label together!
This BLOG is best viewed at a screen resolution of 1024x768. Click here to get instructions on how to adjust your monitor to these settings.



Tuesday, January 27, 2009

New Project "Igazi"



This is a new Project. Got the wings cut by Craig Baker, very thin profile, 50 cm wingspan. as a wing reinforcing method, due to the thin section, I thought of using 6x2 flat carbon strips. Routed out a small opening (pick 3) then insert the carbon strips vertically (pick 1) and glue in place with Gorilla Glue, the glue remains rubbery and expands slightly while setting, though filling all the gaps neatly. Further I intend using a 55 diam ducted fan assembly pushing approx 1000 gr thrust, +-45000 rpm with a 2100 3s LiPo battery.
Posted by at

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)